The resistor-wet LTC6905 oscillator generates clock signals from 17 to 170 MHz using an SOT-23 device and one resistor. The oscillator has guaranteed specifications over commercial (0 to 70°C), ...

The LP030 30-MHz programmable oscillator locks to a user-supplied reference frequency and generates a low-noise sinewave output from 1 µHz to 30 MHz. It combines a ...

The smaller ATtiny microcontrollers have a limited number of pins, and therefore rely on an internal 9.6 MHz oscillator rather than an external crystal. This oscillator lacks the accuracy of a crystal ...

Crystek's CVCO55CC-1850-1850 VCO (Voltage Controlled Oscillator) operates at 1850 MHz with a control voltage range of 0.5 to 4.5V. This VCO features a typical phase noise of -117 dBc/Hz @ 10kHz offset ...

The RTL-SDR dongle is a real workhorse for radio hacking. However, the 28.8 MHz oscillator onboard isn’t as stable as you might wish. It is fine for a lot of applications and, considering the price, ...

“Facts are stubborn things” (John Adams, et al). I added two 50-ohm outputs to the schematic of my published voltage-to-frequency converter (VFC) circuit (Figure 1). Then, I designed a PCB, purchased ...

All-silicon-based clock-oscillator ICs have always been available for applications that don't require high levels of precision. Yet these devices don't meet the tight tolerance requirements many ...

Analog IPs are developed to meet a set of specific requirements, and to change its specifications for a different application, a significant amount of time and effort may have to be applied on ...

SiTime has introduced SiT5977, a ±1ppb/°C mems-based 156.25MHz oscillator for network timing in data centres. It is “capable of driving 800G and higher links via 80fs phase jitter and LVDS outputs,” ...

The 3.3V 100MHz Oscillators library includes a programmable oscillator macro I/O cell. 100 MHz programmable oscillator These libraries are off ...